Account Xl 75 75l Electronic Flat Back 3kw Water Heater
Product Ref: 5500/8544303
XL75 75L 3kW Electronic Flat Back Water Heater Capacity: 75 ltr Energy rating: 3kW Dimensions mm: 970H x 615W x 245D Heating element: Embedded rod Thermostat: Thermistor controlled; range 25°C to 80°C with LED temperature display Water tank: Copper sheet with brazed seams Case: Corrosion -resistant white; enamelled steel Insulation: Fully fire -retardant; foiled; urethane core; slab Safety feature: Over -temperature cut -out Approvals: WRAS approved and CE endorsed Technical Support and HydroCare maintenance: Contact Zip on 0800 077 8302 Warranty: One -year Installation: Should be mounted on a wall with the base of the heater at least 750 mm above the highest draw -off point The wall and fastenings must support the weight of the heater when full Should be fastened using the integral load bearing slots in the rear of the case Top clearance of 150 mm above heater should be allowed for service access Bottom clearance of 200 mm must be allowed for withdrawal of heating element Plumbing: All plumbing connections via compression fittings at base or rear of the heater Cold inlet 15 mm; hot outlet 22 mm; overflow 22 mm Electrical: To be wired to a double pole fused spur; minimum break rating of 13 amps Installation must comply with current IEE regulations Caution: Variable temperature water heaters should be set only in strict compliance with regulations governing the temperature of stored and dispensed hot water
Related Products
