Account P4/102 10l 2kw Tudor Over-sink Point Of Use - 455mm x 310mm x 265mm
Product Ref: 5500/8544258
P4/102 10L Tudor 2kW; Over -sink Water Heater with Spout Capacity: 10 ltr Rating: 2kW Dimensions mm: 455H x 310W x 265D Heating element: Embedded rod type Thermostat: Capillary type; adjustable 35°C to 80°C Water tank: Approved polypropylene tested to 2.75 bar Case: Impact resistant plastic Insulation: High density; CFC -free; polyurethane foam Approvals: WRAS approved and CE endorsed Warranty: One -year Simple to operate Temperature controlled water whenever you want it Externally adjustable temperature control Neon light indicates when the heating element is ‘ON’ Safety features: Open -outlet non -pressurised system Frost protection setting protects heater when not in use Manually re -settable overtemperature safety cut -out Installation: Supplies hot water to a single outlet using approved vented taps. Connects directly to the cold water supply. No need for expansion vessel or relief valve Plumbing: Can be connected to a rising main or to a cistern with a minimum working head of 5 metres All water connections are via 15 mm compression fittings Over -sink models are supplied with a 300 mm open outlet spout and water control valve Under -sink models must be installed only with a Zip approved open -outlet tap Over -sink and under -sink models are NOT interchangeable Electrical: To be wired to a double pole fused spur; minimum break rating of 13 amps. Mains cable fitted Installation must comply with current IEE regulations Caution: Variable temperature water heaters should be set only in strict compliance with regulations governing the temperature of stored and dispensed hot water
Related Products
