Account Af2200 Indirect 200l Aquaflo Unvented S/s Cylinder
Product Ref: 5500/8544299
AF2200 200L Aquaflo Unvented S/S cylinder; Indirect 20.0kW plus 1 x 3kW Electric element and unvented kit Actual Capacity: 189 ltr Dimensions mm: 1070H x 580 Dia Thermostat Adjustable; 45°C - 75°C Thermal cut -out: Manually resettable; set to 85°C Water vessel: Stainless steel tested to 16 bar Insulation: High performance CFC free injected foam insulation Controls: Pressure reducing valve and line strainer set to 3.5 bar Expansion relief and non -return valve set to 6 bar Pressure and temperature relief valve set to 7 bar and 90° External expansion vessel pre -charged to 3.5 bar Expansion capacity: 19.0 litre for 200 litre models Approvals: WRAS approved and CE endorsed; LVD; EMC England & Wales - The Building Regulations 2000 G3 and Part L. Scotland - Technical Standards P3 Northern Ireland - Regulation P5 Installation: When deciding the final location of the heater; consideration should be given to the safe and visible disposal of any water resulting from leaks or seepage. This is particularly relevant when the heater is located in a roof space; cupboard or any concealed location Plumbing: Must be installed by a competent installer in accordance with Local Regulations. For floor standing only Electrical: To be wired to a double pole fused spur; minimum break rating of 13 amps Installation must comply with current IEE regulations Caution: Variable temperature water heaters should be set only in strict compliance with regulations governing the temperature of stored and dispensed hot water Warranty: Ten -years on tank; Two -years on parts
Related Products
